Answers
Dec 17, 2020 - 07:57 AM
Close the water shut off valve and disconnect the power cord.
Lift the unit up and slide it forward to remove from the catch plate.
Raise the unit to view the underside where the drain bolt is located.
Use a coin or flat head screwdriver to move the drain bolt from the close position to the open position (1/4 to 1/2 turn only) to drain the unit of its water.
You may need to open the drain bolt fully by using the flat side of the screwdriver.
Once fully drained, close the drain bolt, reinstall the unit and allow it to sit undisturbed for 30 minutes.
Open the water shut off valve, wait 30 seconds then reconnect the power cord.
Hold down the STOP button on the side control panel for 5 seconds.
Test for functionality.
Source: BB600 Hard Reset
